Gasboy Fuel Point-Special Hose Manuel d'utilisateur télécharger pdf

C35843 Rev. 6256

ASSEMBLY INSTRUCTIONS FUEL POINT SPECIAL HOSE ACCESSORIES

General

Standard dispenser modification kits are designed for hoses that do not exceed 15 feet in length.

When extra long hoses are required with Fuel Point, the following special accessories may be

required and must be ordered separately.

36 Foot Wire Assembly, C06799

This wire assembly is designed to use "as is" for external hose wire applications exceeding the

standard 24-foot kit wires supplied. Also see C09496 extra-long 24-foot hose sleeve when

required.

When fabricating the extra long hoses configured for internal wire, add the brass fittings and O-

ring furnished in the standard kits to this wire assembly.

Starting at the connector end, measure 6" and cut the wire. Carefully feed the wire through the

large female thread exiting through the 5/16 threaded hole. Slide the O-ring and small fitting on

the wire and strip the outer jacket to about 1", conductors to 1/4", and crimp using two butt

connectors supplied. Apply heat to shrink the crimp connection.

CAUTION: Assembling the brass fittings by splicing and using butt connectors eliminates

sliding the brass fittings and O-ring the entire length of the hose wire. Sliding the

fittings can damage the outer wire jacket within the hose and cause fuel leaks at

the environmental connectors.

20" Flex Tubing Kit, C07031

Special applications may require protecting exposed N-ring wire when fitting covers cannot be

located directly at the dispenser. Typically, this occurs when external fuel filters or breakaway

fittings are attached at the dispenser.

The tubing kit starts under the hose cover nearest

the dispenser and runs into the dispenser. To

protect the wire, two (2) nylon bushings are

supplied and are held in place with tiewraps as

shown in the diagrams at right.

Be sure to slide the bushings so that the flex

tubing is compressed before installing tiewraps.

Résumé du contenu

Page 1

C35843 Rev. 6256ASSEMBLY INSTRUCTIONS FUEL POINT SPECIAL HOSE ACCESSORIESGeneralStandard dispenser modification kits are designed for hoses that do no

Commentaires sur ces manuels

Pas de commentaire

Gasboy Fuel Point-Special Hose Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Gasboy Fuel Point-Special Hose. Gasboy Fuel Point-Special Hose User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Gasboy Fuel Point-Special Hose