Gasboy 1000 Series to FleetKey Conversion Manual Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Gasboy 1000 Series to FleetKey Conversion Manual. Gasboy 1000 Series to FleetKey Conversion Manual User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 22
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0


SERIES 1000
TO FLEETKEY CONVERSION
MANUAL
C35328
GASBOY INTERNATIONAL LLC
Vue de la page 0
1 2 3 4 5 6 ... 21 22

Résumé du contenu

Page 1 - GASBOY INTERNATIONAL LLC

 SERIES 1000 TO FLEETKEY CONVERSION MANUAL C35328 GASBOY INTERNATIONAL LLC

Page 2 - Rev. 03/07/03

Series 1000 to FleetKey Conversion 03/07/03 55. Working inside the head of the unit, remove the 2 screws which secure the optical reader bracket to

Page 3

GASBOY FleetKey 6 03/07/03 INSTALLATION OF KEY SYSTEM 1. From the conversion kit, press the Trim Edge Material onto the bottom edge of the PCB Mo

Page 4 - CONTENTS

Series 1000 to FleetKey Conversion 03/07/03 78. Install the 10-position Key Receptacle Ribbon Cable(s) by inserting one end into the top of the Key

Page 5

GASBOY FleetKey 8 03/07/03 14. There is a set of operating instructions silkscreened to the right of the keypad on the face of the Series 1000.

Page 6 - IN THIS MANUAL

Series 1000 to FleetKey Conversion 03/07/03 9

Page 7

GASBOY FleetKey 10 03/07/03 POWER ON AND TEST 1. When you have finished installing the conversion kit, turn on the power for the Series 1000 Syst

Page 8

Series 1000 to FleetKey Conversion 03/07/03 11START-UP COMMANDS Use the following commands to set up the system at the initial start-up. The Serie

Page 9 - CONVERSION INSTRUCTIONS

GASBOY FleetKey 12 03/07/03 4. Type SC to load your system configuration data. ↵↵ ↵ ↵↵↵↵↵↵↵↵↵↵↵↵↵↵↵↵↵↵↵ NOTE: Additional system configuration pro

Page 10

Series 1000 to FleetKey Conversion 03/07/03 135. Type CT to clear the key receptacle read and error table. ↵ 6. Type RT to initialize the transacti

Page 11 - INSTALLATION OF KEY SYSTEM

GASBOY FleetKey 14 03/07/03 10. Type WK to load the 4-digit working key that is assigned to your system at the time of order. This is used in calc

Page 12

 GASBOY Series 1000 to FleetKey Conversion Manual C35328 Rev. 03/07/03 Copyright 2003 by Gasboy International

Page 13

Series 1000 to FleetKey Conversion 03/07/03 1514. Type LP to assign specific fuels, prices, tanks, totalizer readings, and timeouts to your pumps.

Page 14 - 03/07/03

GASBOY FleetKey 16 03/07/03 16. Type LL to assign the maximum fuel quantities to the limitation codes. For initial start-up, assign quantities to

Page 15 - POWER ON AND TEST

GW01 - 6/04/02 Rev. 1 WARRANTY General Statements: Gasboy International LLC. warrants all new equipment manufactured by Gasboy against defective ma

Page 17

03/07/03 Contents-1 CONTENTS IN THIS MANUAL ... 1 CONT

Page 19

03/07/03 1 SERIES 1000 TO FLEETKEY CONVERSION IN THIS MANUAL The instructions in this manual are provided to assist the system operator in t

Page 20

GASBOY FleetKey 2 03/07/03 CONTENTS OF THE CONVERSION KIT Depending on the FleetKey system you ordered and the features of your current Series 100

Page 21 - WHERE TO GO FROM HERE

Series 1000 to FleetKey Conversion 03/07/03 3

Page 22 - WARRANTY

GASBOY FleetKey 4 03/07/03 CONVERSION INSTRUCTIONS Use the following instructions to convert your system. The first two subsections detail remova

Commentaires sur ces manuels

Pas de commentaire